Use & Care Guide

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 5/02/2006

DAP® Fast ‘N Final



Lightweight Spackling

• One step – no sanding

• No cracking

• Fast drying

• Interior/exterior use

Packaging: 4 eaches-1 fluid ounce packs, 1/2 pint tub, 1 pint tub, 1 quart tub, 1 gallon tub, 273 ml,

473 ml, 946 ml, 3.8 L

Color: White

UPC Numbers: 12149, 12140, 12141, 12142, 12143, 23030, 23050, 71354, 23090

Company Identification:

Manufacturer: DAP Inc., 2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Usage Information: DAP HELPLINE: 888-DAP-TIPS, 9:00 am to 7:00 pm EST.

Order Information: 800-327-3339

Fax Number: 410-534-2650

Also, visit the DAP website at www.dap.com.

Product Description:

DAP® Fast ‘N Final® Lightweight Spackling may be used to spot patch and repair holes, cracks, crevices and

dents in interior and exterior surfaces such as drywall, plaster, wood and stucco. Its advanced, lightweight

formula is easy to apply and offers long lasting adhesion and durability. Will not crack or shrink. Paintable.

Suggested Uses:

Ideal for filling holes, cracks and defects:

• Drywall/Plaster

• Wood

• Stone

• Stucco

Surface Preparation & Application:

• Surface must be clean, dry and free of foreign material.

• Mix gently before use. Apply with a clean putty knife.

• For a smoother finish, dip putty knife into water and lightly smooth spackling.

• One application is usually sufficient for small repairs. For repairs deeper than 1/4”, apply two or more layers

allowing to dry between applications.

• May be painted within minutes with a latex paint.

• If sanding is desired, or if an oil-based paint is to be used, allow to dry thoroughly approximately 2-4 hours.

Wet sanding is recommended to avoid generation of dust.

• Clean tools immediately with water.

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 5/02/2006 DAP® Fast ‘N Final Lightweight Spackling • • • • One step – no sanding No cracking Fast drying Interior/exterior use Packaging: Color: UPC Numbers: 4 eaches-1 fluid ounce packs, 1/2 pint tub, 1 pint tub, 1 quart tub, 1 gallon tub, 273 ml, 473 ml, 946 ml, 3.8 L White 12149, 12140, 12141, 12142, 12143, 23030, 23050, 71354, 23090 Company Identification: Manufacturer: DAP Inc.
PAGE 2
For Best Results: • Do not apply when temperatures are below 50° F. • Do not apply outside if rain is expected within 24 hours. • Do not use on floors or as a caulk, sealant or joint filler over cracks and joints where expansion and contraction may occur. • DO NOT USE AS A SKIM COAT. • For exterior applications, always topcoat with a good quality paint. • Do not use for tuck pointing applications on brick.