Use and Care Manual

3
Typical Physical & Chemical Characteristics:
Consistency: Smooth and creamy, non-slumping paste
Volatile: Water
Flash Point: >212ºF
Bubble Resistant: Yes
Filler: Calcium carbonate
Solids: 75% by weight
Extrusion Rate: 20 - 30g/15 seconds Burrell Extrusion
Vertical Sag: < .15 inches ASTM C2202 mod. 3/8” depth
Weight per Gallon: 10.95 lbs./gallon
Hardness Shore A: 24 C661
Tensile Strength: > 100 psi D412
Maximum Elongation: >500 % D412
Service Temperature Range: -30°F to 160°F
Application Temperature Range: 40ºF to 100ºF
Freeze Thaw Stability: Passes 5 Cycles
Peel Adhesion (180° C794):
PVC Trim 17 lbs/in
Glass 19 lbs/in
Fiber Cement 14 lbs/in
Aluminum 24 lbs/in
Vinyl Siding 20 lbs/in
Mortar 20 lbs/in
SDS: 00010329001
ADHERES TO:
Vinyl, Aluminum, Metal, Fiber Cement, Wood,
Cedar, Concrete, Masonry, Brick, Stone,
Stucco, PVC, Composite, Fiberglass, Glass
SPECIFICATIONS
ASTM C920, Type S, Grade NS, Class 35
Federal Spec TT-S-00230C, Type II
PHYSICAL PROPERTIES
Application Temp Range:
40°F to 100°F
Recommended Bead
Size:
3/8”
Coverage:
3/8” bead 14 linear ft.
Skin Time:
10 -15 minutes
Tack Free Time:
30 minutes
Full Cure Time:
7-14 days depending on joint width and depth,
temperature, humidity & substrate
Paint Ready Time:
1 hour w/ latex or oil-based paints. Use latex-
based primer for oil-based paints.
Water Ready Time:
1 hour
Joint Movement/
Flexibility:
+/-35%, Permanently flexible
Mold Resistance:
Lifetime Mold, Mildew & Algae Resistance
Guarantee
Odor:
Low
Clean-Up:
Water
VOC Content:
NCCS Calif. ARB VOC <1.5% wt/wt (VOC 27 g/L)
Shelf Life:
12 months (Unopened/cool & dry conditions)