Use and Care Manual

 For a smoother finish, dip putty knife in water and lightly smooth spackling.

 One application is usually sufficient for small repairs. For repairs deeper than 1/8”, apply two or more

layers allowing spackling to dry between applications.

 May be sanded or painted in 1 to 5 hours depending on temperature, humidity and depth of fill. Wet

sanding is recommended to avoid generation of dust.

 Clean tools immediately with water.

 Ensure that ALEX PLUS® Spackling is thoroughly dry before sanding or applying oil-based paint.

Spackling may be painted immediately upon drying with a quality latex paint.

For Best Results:

 Do not apply when temperatures are below 50°F.

 Do not apply outside if rain is expected within 24 hours.

 Do not use on floors or as a caulk, sealant or joint filler over cracks and joints where expansion and

contraction may occur.

 DO NOT USE AS A SKIM COAT.

 For exterior applications, always topcoat with a quality paint.

 If a textured finish is desired, add clean sand to spackling compound prior to application.

 Do not use for tuck pointing applications on brick.

 For larger areas to be patched on bare concrete, use a latex fortified Portland cement-based dry mix.

Typical Physical & Chemical Characteristics:

Consistency: Paste

Vehicle: Latex Polymer

Volatile: Water

Filler: Inert filler

Odor: Mild

Weight/Gallon: 15.6 pounds

Solids: 76% by weight

Application Temperature: 50°F or higher

Service Temperature: 0ºF to 150ºF

Shelf Life: 1 Year

Freezing: Freeze/thaw stable 5 cycles at 0ºF

Drying Time: 1 to 5 hours depending on temperature, relative humidity and depth of fill.

SDS No.: 00017077001

Clean Up & Storage:

Wash tools immediately after use with water. Dried material must be removed by scraping or sanding. Be sure

container lid/cap is closed and tightly sealed. Store in a cool, dry place.

Safety:

See product label and Safety Data Sheet (SDS) for additional information. For an SDS, contact your supplier or

visit dap.com.

Warranty:

If product fails to perform as directed, within one year from the date of purchase, call 1-888-DAP-TIPS, with

your sales receipt and product container available, for replacement product or sales price refund. DAP will not

be responsible for incidental or consequential damages.