Use and Care Manual

ManualsBrandsDAP ManualsPaintBLOCKADE 10.1 oz. High Performance Intumescent Acrylic Sealant (12-Pack)

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Last Revised: 9/22/09

DAP

BLOCKADE

High Performance Intumescent Acrylic Sealant

• Meets ASTM E- 814/UL 1479

• Intumescent expansion fills voids created by combustible materials burned during a fire.

• Treats general firestopping applications for combustible and non-combustible penetrations.

• Excellent adhesion to unprimed surfaces.

• Red color easily recognized as a firestop sealant.

Packaging: 10.1 fluid ounce cartridge

Colors: Red

UPC Numbers: 70798 18858

Company Identification:

Manufacturer: DAP Products Inc., 2400 Boston St., Ste. 200, Baltimore, Maryland 21224

Usage Information: DAP HELPLINE: 888-DAP-TIPS, 9:00 am to 7:00 pm EST.

Order Information: 800-327-3339

Fax Number: 410-534-2650

Also, visit the DAP website at www.dap.com.

Product Description:

DAP

BLOCKADE

is a single component, water-based intumescent acrylic firestop sealant. The

intumsecent property of DAP

BLOCKADE

means that the material will expand to fill the void caused from

combustible materials burned during a fire. DAP

BLOCKADE

is a unique firestopping sealant that has

been tested at independent laboratories to treat 95% of the applications you encounter on the job. DAP

BLOCKADE

also has exceptional sealant qualities, such as superb unprimed adhesion, excellent flexibility,

easy gunning and is paintable once fully cured.

Use On: Treats general firestopping applications for combustible and non-combustible penetrations.

Suggested Uses:

• Steel, copper and

EMT pipe

• Plastic pipe (vented

and closed)

• Fiberglass & AB/PVC pipe

insulation

• Romex, cables,

jacketed cables

and bundles

• Ductwork

• Wood frame

construction

• Concrete and CMU

• Gypsum wallboard

Summary of content (3 pages)

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Last Revised: 9/22/09 DAP® BLOCKADE® High Performance Intumescent Acrylic Sealant • Meets ASTM E- 814/UL 1479 • Intumescent expansion fills voids created by combustible materials burned during a fire. • Treats general firestopping applications for combustible and non-combustible penetrations. • Excellent adhesion to unprimed surfaces. • Red color easily recognized as a firestop sealant.
PAGE 2
Adheres To: • • • • • Wood Aluminum Vinyl Plaster & drywall Painted surfaces • • • • Metal Glass Masonry Stucco • • • • Brick Concrete Most plastics Stone Performance Characteristics: • ASTM E-814/UL 1479: Standard Test Method for Fire Tests of Through Penetration Firestops Through Penetration Assembly Numbers: C-AJ-1599 (C-AJ-1337) F-C-1160 (F-C-1068) C-AJ-2624 (C-AJ-2280) F-C- 2390 (F-C-2169) C-AJ- 2625 (C-AJ-2363) F-C- 3105 (F-C-3053) C-AJ-3303 (C-AJ-3172) F-C-5084 (F-C-5041) C-AJ- 5328 (C-AJ-5143)
PAGE 3
Storage: Store in unopened containers in dry areas under 80ºF. Protect from freezing. Physical & Chemical Characteristics: Solids: 60% min. Service Temperature Range: 15°F to 120°F Application Temperature Range: 40°F to 120°F Tack Free Time: 2 to 4 hours Cure Time: 14 to 28 days depending on temperature, humidity, joint depth Density: 9.82 lbs./gal.