Use and Care Manual

1
Technical Bulletin
2400 Boston Street, Suite 200, Baltimore, Maryland 21224
Phone: [phone] or 800-543-3840
Revised: 1/9/2007
DAP
®
BEATS THE NAIL
®
Drywall Construction Adhesive
• Bonds drywall, paneling & plywood to wood or steel framing
• Quick-grab formula
•
Meets ASTM Specification C 557
Packaging: 28 fl. oz. (828 mL)
Color: Tan
UPC Number: 70798 25037
Company Identification:
Manufacturer: DAP Inc., 2400 Boston St., Baltimore, Maryland 21224
Usage Information: DAP HELPLINE: 888-DAP-TIPS, 9:00 am to 7:00 pm EST.
Order Information: 800-327-3339
Fax Number: 410-534-2650
Also, visit the DAP website at www.dap.com.
Product Description:
DAP® Drywall Construction Adhesive is specially formulated for bonding drywall, paneling and plywood to
wood or steel framing. It reduces fastener use up to 50%. Quick-grab formula is easy to apply and requires less
bracing. Meets ASTM Specification C 557 for interior use.
Suggested Uses
:
Bonds drywall, paneling and plywood to wood or steel framing.
For Best Results
:
• Apply in temperatures between 40º – 90º F.
• Keep adhesive at or above 40°F prior to use for easier gunning.
• Do not use wallboard that is warped or in bad condition.
•
When working with concrete substrates, make sure concrete has cured for at least 28 days and is free of any
release agents.
•
Not recommended for applications other than drywall installation.
• Not for continuous water submersion.
Surface Preparation & Application:
1. Surfaces must be clean, dry, structurally sound and free of foreign material.
2. Pre-cut and fit materials before applying adhesive.
3. Trim nozzle to 3/8” bead size.
4. Puncture inner foil seal
5. Load cartridge into caulking gun.
6. Apply a continuous bead to the surface. (see specific Application Tips below).