MSDS

This Material Safety Data Sheet is available in American Spanish upon request.
Los Datos de Serguridad del Producto pueden obtenerse en Espanol si lo riquiere.
Emergency Overview: A(n) tan thick liquid product with a slight odor. Extremely flammable liquid and vapor. Vapors
may cause flash fire or explosion. DANGER! Harmful or fatal if swallowed. Aspiration hazard if swallowed - can enter
lungs and cause damage. Harmful if inhaled. May cause eye, skin, nose, throat and respiratory tract irritation. May cause
sensitization by inhalation and skin contact. Contents under pressure. Do not puncture can. Exposure to temperatures
above 120 'F may cause can to rupture. The primary adverse health effects of this product are related to the Polymeric
Isocyanate (MDI) component. Therefore, adequate ventilation should be provided to avoid exceeding the exposure limits
of these components (See Section 8). The likelihood of exceeding these limits are low due to the low concentration of
vapor produced during normal use. However, if used indoors, mechanical ventilation or exhaust should be provided during
use and until product is cured. This product has strong adhesive-like characteristics and will adhere aggressively to skin
and other surfaces. If accidental contact occurs, follow the appropriate first-aid procedure described in Section 4 of this
MSDS. MDI vapor can irritate the respiratory tract causing runny nose, sore throat, coughing and reduce lung function.
Refer to other MSDS sections for other detailed information.
Effects Of Overexposure - Eye Contact: Signs and symptoms may include: pain, tears, swelling, redness and blurred
vision. Mist and vapors may cause eye irritation. Direct eye contact may cause irritation. Foam contact can cause physical
damage due to adhesive character.
Effects Of Overexposure - Skin Contact: Harmful: possible risk of irreversible effects in contact with skin. May cause
sensitization by skin contact. This product has strong adhesive-like characteristics and will adhere aggressively to skin
and other surfaces. If accidental contact occurs, follow the appropriate first-aid procedure described in Section 4 of this
MSDS. Prolonged and repeated skin contact may cause dermatitis, drying and defatting due to the solvent properties.
Effects Of Overexposure - Inhalation: Vapors may be irritating to eyes, nose, throat, and lungs. Inhalation of vapors is
Material
Safety
Data
Sheet
24 Hour Emergency Phone Numbers:
Medical/Poison Control:
In U.S.: Call 1-800-222-1222
Outside U.S.: Call your local poison
control center
Transportation/National Response
Center:
1-800-535-5053
1-352-323-3500
NOTE: The National
Response
Center
emergency numbers to
be used only in the event of chemical emergencies involving a
spill, leak, fire, exposure or accident involving chemicals.
Provide this information to employees, customers, and users of this product. Read this MSDS before handling or disposing of
this product. This product is covered by the OSHA Hazard Communication Standard and this document has been prepared in accordance with
requirements of this standard. All abbreviated terms used in this MSDS are further described in Section 16.
Section 1 - Chemical Product / Company Information
Product Name:
Fireblock Foam Polyurethane Foam Sealant
Revision Date:
01/09/2014
Product UPC Number:
070798442429
Supersedes:
10/17/2012
Product Use/Class:
Foam Sealant
MSDS Number:
00077006004
Manufactured for:
DAP Products Inc.
2400 Boston Street Suite 200
Baltimore, MD 21224-4723
888-327-8477 (non-emergency matters)
Section 2 - Hazards Identification
Page
1
of
6
00077006004English

Summary of content (6 pages)