MSDS

ManualsBrandsDAP ManualsPaintFastpatch 30 3.5 lb. White Patching Compound Powder

This Material Safety Data Sheet is available in American Spanish upon request.

Los Datos de Serguridad del Producto pueden obtenerse en Espanol si lo riquiere.

Emergency Overview: A(n) white to off-white powder product with a slight odor. WARNING! May cause eye, skin, nose,

throat and respiratory tract irritation. Removal of this product after use or by dry sanding will generate dust and exposure

to this dust may be irritating to the eyes, ears, nose and mouth. May cause burns. If dry-sanded, exposure to dust may

result in build-up of material in eyes, ears, nose, and mouth.

Refer to other MSDS sections for other detailed information.

Effects Of Overexposure - Eye Contact: May cause eye irritation. Signs and symptoms may include: pain, tears,

swelling, redness and blurred vision. May cause eye irritation of susceptible persons.

Effects Of Overexposure - Skin Contact: May cause skin irritation. May cause dry skin. May develop enough heat to

cause burns if a large mass such as a cast of hand or arm, is kept in contact with skin while hardening.

Effects Of Overexposure - Inhalation: Inhalation may cause irritation to the respiratory tract (nose, mouth, mucous

membranes).

Effects Of Overexposure - Ingestion: Ingestion may result in obstruction when material hardens. Irritating to mouth,

throat and stomach.

Effects Of Overexposure - Chronic Hazards: Repeated or prolonged exposure may cause respiratory system damage.

Material

Safety

Data

Sheet

24 Hour Emergency Phone Numbers:

Medical/Poison Control:

In U.S.: Call 1-800-222-1222

Outside U.S.: Call your local poison

control center

Transportation/National Response

Center:

1-800-535-5053

1-352-323-3500

NOTE: The National

Response

Center

emergency numbers to

be used only in the event of chemical emergencies involving a

spill, leak, fire, exposure or accident involving chemicals.

IMPORTANT:

Provide this information to employees, customers, and users of this product. Read this MSDS before handling or disposing of

this product. This product is covered by the OSHA Hazard Communication Standard and this document has been prepared in accordance with

requirements of this standard. All abbreviated terms used in this MSDS are further described in Section 16.

Section 1 - Chemical Product / Company Information

Product Name:

Fast Patch 30

Revision Date:

01/17/2013

Product UPC

Number:

070798585508

Supersedes:

New

Product Use/Class:

Dry Mix Spackle/Wallboard Joint Compound

MSDS Number:

00010126001

Manufacturer:

DAP Products Inc.

2400 Boston Street Suite 200

Baltimore, MD 21224-4723

888-327-8477 (non-emergency matters)

Section 2 - Hazards Identification

Page

00010126001English

Summary of content (6 pages)

PAGE 1
00010126001English Page 1 of 6 Material Safety Data Sheet 24 Hour Emergency Phone Numbers: Medical/Poison Control: In U.S.: Call 1-800-222-1222 Outside U.S.: Call your local poison control center Transportation/National Response Center: 1-800-535-5053 1-352-323-3500 NOTE: The National Response Center emergency numbers to be used only in the event of chemical emergencies involving a spill, leak, fire, exposure or accident involving chemicals.
PAGE 2
00010126001English Page 2 of 6 The International Agency for Research on Cancer (IARC) has determined that crystalline silica in the form of quartz or cristobalite that is inhaled from occupational sources is carcinogenic to humans (Group 1- carcinogenic to humans). Refer to IARC Monograph 68, Silica, Some Silicates and Organic Fibres (published in June 1997) in conjunction with the use of these materials.
PAGE 3
00010126001English Page 3 of 6 Special Firefighting Procedures: Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear. Use water spray to cool exposed surfaces. Section 6 - Accidental Release Measures Steps To Be Taken If Material Is Released Or Spilled: Wear proper protective equipment as specified in Section 8. Sweep up excess powder. Place remaining powder into containers. Section 7 - Handling And Storage Handling: Use in well ventilated area.
PAGE 4
00010126001English Page 4 of 6 Skin Protection: Wear gloves with repeated or prolonged use. Eye Protection: Goggles or safety glasses with side shields. Other protective equipment: Provide eyewash. Provide coveralls if body contact may occur. Hygienic Practices: Remove and wash contaminated clothing before re-use. Important: Listed Permissible Exposure Levels (PEL) are from the U.S. Dept. of Labor OSHA Final Rule Limits (CFR 29 1910.1000); these limits may vary between states.
PAGE 5
00010126001English Page 5 of 6 Section 13 - Disposal Information Disposal Information: Dispose of material in accordance with all federal, state and local regulations. State and Local regulations/restrictions are complex and may differ from Federal regulations. Responsibility for proper waste disposal is with the owner of the waste. EPA Waste Code if Discarded (40 CFR Section 261): None.
PAGE 6
00010126001English Page 6 of 6 WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Section 16 - Other Information HMIS Ratings: Health: 1 Flammability: 0 Reactivity: 0 Volatile Organic Compounds (VOC), less water less exempts: g/L: Personal Protection: X 0 lb/gal: 0 Volatile Organic Compounds (VOC), less water less exempts, less LVP-VOCs: wt:wt%: 0 wt:wt%: 0 REASON FOR REVISION: Periodic Update Legend: N.A.