Use and Care Manual

ManualsBrandsDAP ManualsPaintFastpatch 30 3.5 lb. White Patching Compound Powder

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 1/28/13

DAP

FASTPATCH

™

Patching Compound Powder

 For fast repairs to drywall & plaster walls & ceilings

 Fill, level or patch concrete, masonry & wood

 Finish & repair drywall seams

 Ideal as floor underlayment

 Non-shrinking, strong anchoring for fasteners

 Sets in 30 minutes, patch & paint in 1 day

 Easy to mix, apply & sand

 No priming needed

 Makes up to 2 quarts

 Interior use

Packaging: Net wt. 3.5 lbs.

Color: White

UPC Numbers: 70798 58550 0

Company Identification:

Manufacturer: DAP Products Inc., 2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Usage Information: DAP HELPLINE: 1-888-DAP-TIPS or visit dap.com and click on “Ask the Expert”

Order Information: 800-327-3339

Fax Number: 410-558-1068

Also, visit the DAP website at dap.com.

Product Description:

DAP

FASTPATCH™ 30 is a high-performance, multi-purpose powder patching compound formulated to set

fast and dry hard, allowing you to finish interior repair projects in less time than traditional patching

compounds. Sets in just 30 minutes, so you can patch and paint in one day. No need to prime before painting.

Easy to mix, apply and sand. DAP

FASTPATCH™ 30 is ideal for a wide variety of applications including

repairing holes and cracks in drywall, plaster, wood, above-grade concrete and masonry. It can also be used to

finish drywall seams. Its high compressive strength makes it an excellent floor underlayment for patching and

leveling before the installation of floor coverings. This powerful patch may be filed, drilled, nailed, sculpted

or chiseled and provides exceptional anchoring strength for fasteners. Convenient and easy to use powder

formula lets you mix only what you need for the job at hand. Meets ASTM C475. Interior use only.

Suggested Uses:

 Fast repairs to holes, cracks and nail pops in drywall and plaster walls and ceilings.

 Fill, level or patch small cracks, holes and chips in concrete, masonry, plaster, wallboard and wood

 Can also be used as joint compound for finishing and repairing drywall seams.

 Provides an excellent floor underlayment for patching and leveling before the installation of floor

coverings. (Not recommended for areas that collect standing water or receive continuous moisture unless

coated with a waterproofing product. DAP

FASTPATCH

™

30 should never be used as a wear surface.

Summary of content (4 pages)

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 1/28/13 DAP® FASTPATCH™ 30 Patching Compound Powder           For fast repairs to drywall & plaster walls & ceilings Fill, level or patch concrete, masonry & wood Finish & repair drywall seams Ideal as floor underlayment Non-shrinking, strong anchoring for fasteners Sets in 30 minutes, patch & paint in 1 day Easy to mix, apply & sand No priming needed Makes up to 2 quarts Inte
PAGE 2
When used in subfloors, it must be covered by an acceptable floor covering such as carpet or sheet goods. Not for use in ceramic tile floor applications.) Surface Preparation & Application: Please reference chart below for detailed mixing ratios and coverages. Wall & Ceiling Patch:  Surface must be clean and free of dirt, grease, loose particles and foreign material. Widen cracks to at least ¼” in width.  Apply in room temperature conditions. Do not apply below 50ºF.
PAGE 3
  Mix thoroughly until smooth and free of lumps. Initial mix should be slightly thicker than desired working consistency. If necessary, adjust the consistency with more water. Let soak for 30 seconds. Mix only the amount of product needed for immediate use. With a skim coat of DAP® FASTPATCH™ 30, fill all broken areas, depressions and cracks in the surface of substrate. Make sure that the patch “wets in” properly and uniformly to ensure a good bond. Level and smooth to a feather edge.
PAGE 4
exposure. For emergencies, call your poison control center at 1-800-222-1222. See product label and Safety Data Sheet (SDS) for additional information. For an SDS, contact your supplier or visit dap.com. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. Limited Warranty: Manufacturer will not accept liability for more than replacement product or sales price refund.