Use and Care Manual

Technical Bulletin

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100 or 800-543-3840

Revised: 1/30/03

DAP® WELDWOOD® FRP Adhesive

• No bracing required

• Non staining

• Easy to spread

• Easy to clean up

• Nonflammable, VOC compliant

Packaging: Gallon & 4 Gallon

Color: Off-White/Light Gray

UPC Number: 70798 60480, 70798 60481

Company Identification:

Manufacturer: DAP Inc., 2400 Boston St., Baltimore, Maryland 21224

Usage Information: DAP HELPLINE: 888-DAP-TIPS, 9:00 am to 7:00 pm EST.

Order Information: 800-327-3339

Fax Number: 410-534-2650

Also, visit the DAP website at www.dap.com.

Product Description:

DAP® WELDWOOD® FRP Adhesive is a nonflammable, freeze/thaw stable, acrylic-based adhesive with

good initial tack and easy-spreading characteristics for rapid installation of most FRP (Fiberglass Reinforced

Plastic) panels.

Suggested Uses:

For FRP to most interior surfaces.

DAP® WELDWOOD® FRP Adhesive is designed for installing FRP to concrete, plaster, plywood, and

gypsum wallboard.

Performance Characteristics:

DAP® WELDWOOD® FRP Adhesive adheres FRP to drywall, cured plaster, wood, plywood, and hardboard,

fully cured concrete and painted surfaces. Do not use over vinyl wall coverings or epoxy paint. Initial “wet

grab” aids in holding FRP in place with little or no bracing required. Will not stain FRP. Water resistant when

dry. It produces low odor and is VOC compliant.

Surface Preparation & Application:

Preparation:

1. Maintain adhesive, FRP and room at a stable temperature of at least 65º F (18º C) for 24 hours before and

after installation.

2. Provide adequate ventilation for 72 hours after installation or until adhesive odors cannot be detected.

PAGE 1
Technical Bulletin 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 or 800-543-3840 Revised: 1/30/03 DAP® WELDWOOD® FRP Adhesive • • • • • No bracing required Non staining Easy to spread Easy to clean up Nonflammable, VOC compliant Packaging: Color: UPC Number: Gallon & 4 Gallon Off-White/Light Gray 70798 60480, 70798 60481 Company Identification: Manufacturer: DAP Inc., 2400 Boston St.
PAGE 2
3. Wall surface must be clean, dry, flat, firm, and free of dust, dirt, loose paint, soap film, oil, curing compound, old adhesive, wax, grease, and foreign material. Scarify (roughen) surface of glossy paint. Plaster must be dry and fully cured. Never apply over wallpaper, vinyl wall coverings, sandy brown coat plaster, or fresh plaster with high-moisture content. Trowel Notch Size 3/32” x 3/32” x 3/32” V-notched trowel Approx.
PAGE 3
Limited Warranty: DAP Inc. warrants that this product, when applied in accordance with our label, technical bulletins and applicable industry standards, will be free from defects in material and workmanship for 12 months from the date of purchase. If a product defect is encountered, call DAP Inc., Technical Customer Service at 1-888-DAPTIPS for further information. Have your sales receipt available. DAP's sole liability is either to supply new product or refund the purchase price.