Assembling & Installation Instructions

ManualsBrandsDarby Home Co ManualsLightingDeMotte 1-Light Lantern Head

ASSEMBLING & INSTALLATION INSTRUCTIONS

 WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

 ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.

ASSEMBLING THE FIXTURE (Fig.1)

1. Shut off the power at the circuit breaker box. Remove old fixture

and all hardware from Junction Box.

2. Carefully unpack your new fixture and lay out all the parts on a clear

area. Take care not to lose any small parts necessary for

installation.

3. Install the light bulbs (Not Included) in accordance with the fixture's

specifications. DO NOT EXCEED THE MAXIMUM WATTAGE

RATING!

4. Raise the pipe nipple of the finial(A) insert cover (C) and lock it

securely with the hex nut(D). Attach the cover(C) onto the fixture

body(E), aligning the holes on it and lock it securely with hex nut(B).

5. Attach the assembly lamp body onto the post (not included) and

lock it securely with the screw (F).

CONNECTING THE WIRES (Fig.2)

1. Connect the electrical wires as follows. Connect the Black wire from

the fixture to the black house (hot) Wire. Connect the white wire

from the fixture to the white (neutral) house wire. Make sure all wire

nuts are secured. You may wrap the connections with electrical

tape. If your outlet box has a ground wire (green or bare copper)

connect fixture’s ground wire to it. Otherwise attach the bare copper

fixture wire to the green ground screw on the mounting plate.

2. Tuck the wire connections neatly into the post.

Your installation is now complete. Return power to the

unction box and test the fixture.

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black(Hot)

FIXTURE

WIRES

White or

Ribbed

FIXTURE

WIRES

Bare

Copper

(Ground)

HOUSE

WIRES

White

(Neutral)

HOUSE

WIRES

Green or Bare

Copper(Ground)

FIG.2

FIG.1

The drawing shown may not exactly match the product enclosed.

However,

the installation instructions do apply to this product.

Thank you for purchasing a product.

Need assistance with parts or assembly? Please call customer service

Summary of content (1 pages)

PAGE 1
ASSEMBLING & INSTALLATION INSTRUCTIONS The drawing shown may not exactly match the product enclosed. However, the installation instructions do apply to this product. FIG.1 WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER. ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR. ASSEMBLING THE FIXTURE (Fig.1) 1. Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box. 2. Carefully unpack your new fixture and lay out all the parts on a clear area.