Assembly And Installation Instructions

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical
codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box
Installation Steps
Hardware Package (included):
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (F)
Wire Nut (D)
Canopy (H)
Top Loop (I)
Collar (J)
Threaded Pipe (E)
Washer (G)
Loop Lock (K)
Chain (L)
1. Attach the threaded pipe to the mounting strap, and then secure it
with a washer and a hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Secure the top loop to the threaded pipe.
4. Secure the loop to the set threaded pipe of the fixture body.
5. Connect the chain:
- Determine length of chain needed to achieve
desired fixture height. (To remove excess chain
section, use pliers to bend link open.)
- Weave the fixture wires and fixture grounding wire
through the chain, collar and canopy.
6. Connect one end of the chain to the loop using
a loop lock.
7. Connect the other end of the chain to top loop
by using the other loop lock.
8.Thread the fixture wire and fixture
grounding wire through the top
loop, threaded pipe and mounting
strap.
Outlet Box
House Grounding Wire
Wire Nut(D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Threaded Pipe (E)
Canopy(H)
Top Loop(I)
Hex Nut(F)
Washer(G)
Collar(J)
Loop Lock(K)
Loop Lock(K)
Chain(L)
Loop
Set Threaded PIpe
Socket
Glass Shade
Fixture Body
Socket Ring
Bulb Type A Max.100W
(not included)