Ethernet Control Box for SE-800 RMC-120 錯誤! USER MANUAL Http://www.datavideo-tek.
Warnings and Precautions 1. Read all of these warnings and save them for later reference. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this unit in or near water. 5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage. 6.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill liquid of any kind onto or into this unit. 12. Except as specifically explained elsewhere in this manual, do not attempt to service this product yourself.
Table of Contents Warnings and Precautions …... …... …... …... …... …... …... …..1 Warnings and Precautions What's in the Box……………..……….………………...…...……….4 Introduction……………………………………...……………..………5 Introduction Product overview Features…………………………………………………..….………...6 User Interface Functions……………………………..……….……...7 Installation, Connections, Set up…………………………..……....14 Connections PC IP setting RMC-120 IP setting SE-800 IP setting Troubleshooting…………………….…………..…………...……....22 No connection FAQ……………………………………………..
What’s in the box? 1. RMC-120 2. AC / DC Power Adaptor * 1 3. RJ45 Ethernet cable 1M * 1 4. RS-232 cable 1.2M * 1 (cross over) 5. User manual 6.
Introduction Thank you for purchasing Datavideo’s RMC-120. RMC-120 is one of SE-800 accessories, which can be used to remote control SE-800 via RS-232 command with a simple, but unique operate control interface. You will be amazed and pleased at what you can do with this advanced piece of technology. In order to bring out the maximum performance of this unit, we recommend that you spend some time to read this manual carefully. Product Overview RMC-120 is special designed for SE-800 control by Ethernet.
Features Standard RJ 45 and RS-232 connectors Easy to install Simply connection Full functions remote control Friendly user interface 6
User Interface Functions 1 2 3 4 5 6 7 8 9 10 23 22 11 21 20 19 18 17 16 15 14 13 12 1. Joy stick and mode selector 13. T-Bar 2. Voice sync adjustment 14. Main video source selectors 3. Video input format selector 15. Sub video source selectors 4. Audio channel selectors 16. Chroma key control 5. Audio follow video switch 17. Preset Banks F1 to F30 6. Color processor 18. Video effects: Picture in Picture 7. Border control 19. Video effects: Paint controls 8.
1. Joystick and Joystick mode selector: The Joystick control can function either in RGB Color Correction mode or Position Control mode, depending on the position of the selector below it. In RGB Correction mode, you can make real time RGB white balance corrections to the Main Source video. This function (white balance adjustment) is effective only with “Input Format selection” mode.
selected on the Main Source bus is automatically selected. If A+V is not engaged, the input source is user selectable. Level controls for each input source are the rotary pots below the selection buttons. 5. A+V: Audio follow video switch. When this button is engaged (you’ll know it is engaged because the LED is lit), the audio associated with a selected input source automatically follows the video through the dissolve. When the button is inactive, audio must be switched manually. 6.
7. Border: controls the border style and color for the Picture in Picture effect. This control is accessible when the Picture in Picture controls, Wipe and Zoom effects. (22.) are engaged. 8. Background: when Background is selected in either the Main or Sub Video Source (14, 15.), and the ON button is pressed (and the LED is lit), repeated presses of the color button cycle through the 8 possible solid backgrounds. 9. Video or Audio: selects the T-Bar operating mode of the SE-800, between Video (default).
14. Main Video Source Selector: used to select which of the four video input channels or background is sent to the Main video output. 15. Sub Video Source Selector: used to select which of the four video input channels or background will be transitioned to or used as a sub source in an effect. 16. Chroma Key: when engaged, this removes the selected color from the Main Video Source and reveals the corresponding portions of the Sub Video Source.
19. Paint: when engaged (and the Paint LED is lit), this applies a posterized effect to the selected Main Video Source. Repeated presses of the up and down buttons set the intensity level of the effect, from 1 (least) to 4 (most). The level setting is displayed in the Effects window above the Keypad (21.). 20. Mosaic: when engaged (and the Mosaic LED is lit), this turns the selected Main Source Video into a mosaic of colored squares.
23. Audio Bus selectors: the LEDs indicate which of the audio inputs are active in the Main audio output mix. Press the button to either include or exclude the channel. The left button, labeled Mic/Aux, can be set to either Mic, Aux, or off. Above all are basic functions descriptions. For more detail information and application, please refer to SE-800 user manual.
Installation, Connections, Set up Connections RS-232 SE-800 Real Panel RS-232 Cable RMC-120 Ethernet HUB Ethernet Cable Computer Real Panel 14
Set up PC Computer IP address Step 1: Click “Start” button.
Step 3: Click on “Properties” Step 4: Select “Internet Protocol (TCP/IP)”, click on “Properties” 16
Step 5: Set up IP address and Subnet mask. IP address: 192.168.0.1 Subnet mask: 255.255.255.
Set up RMC-120 IP address Step 1: Double click or Config Icon Step 2: Click on the Search Buttion Step 3: clink on the MAC List 18
Step 4: Setting the Local IP: 192.168.0.7 Setting the Subnet Mask : 255.255.255.0 Setting the Remote IP: 192.168.0.
Set up SE-800 IP address Step 1: Clink on the se800 icon Step 2: Right Click on the mouse button and select “Options” 20
Step 3: Select “Client Mode” and set up Remote IP 192.168.0.
Trouble shooting 1. “Connect failed” error message. Please check your PC Computer IP address settings again, and be sure it has been set up properly. IP address: 192.168.0.1 Subnet mask: 255.255.255.0 RMC-120 IP address settings assigned Condition Setting the Local IP: 192.168.0.7 Setting the Subnet Mask : 255.255.255.0 Setting the Remote IP: 192.168.0.1 SE-800 PC Control Software IP address settings assigned Condition Client Mode setting Remote IP 192.168.0.
FAQ 1. Q: When I select BACKGROUND, the “ON” button starts blinking. Sometimes it will speed up, but sometimes it will slow down. Is it normal? A: Yes, it’s normal, and it will not affect the performance. 2. Q: When I use GPI control, occasionally the “PLAY” key will turn on in SE-800 switcher. Why the remote interface doesn’t turn on? A: It’s normal. Don’t need to worry. 3.
A: For the ROM B, please make sure all the video effects and transition effects have turned off. Then, press up key and check the check the digital number which shows on “EFFECT” and “SPEED” if it’s showing 2.4 as below.
Specifications RS-232 Data Control Port Connecting Datavideo SE-800 RS-232 Remote Control Port RJ-45 Ethernet Port Connecting PC or Laptop Ethernet Port for Remote Trigger Control Dimensions W x D x H 100m/m x 67m/m x 23m/m Weight 0.12 Kg Power Input: DC 9V/0.1A Accessories AC/DC Power Adapter 1.2M RS-232 Cable x 1 1.2M RJ45 Ethernet Cable x 1 Instruction Manual Installation CD Product registration Go on line www.datavideo-tek.com/product_reg.
Tech support Datavideo maintains five offices worldwide to support this and other products. Datavideo Technologies Co., LTD. 10F, No. 176, Jian-Yi Rd, Chung Ho City, Taipei Hsien 235, Taiwan R.O.C. Tel: 886-2-8227-2888 Email: info@datavideo.com.tw Datavideo Corporation USA 12300-U East Washington Blvd. Whittier CA 90606 USA Tel: (562) 696-2324 Email: contactus@datavideo-tek.com Datavideo Technologies Europe BV Californiedreef 26 3565 BL Utrecht, The Netherlands Tel: +31 30 261 9656 Email: info@datavideo.
Datavideo UK Limited Unit 2 Waterside Business Park Manchester, England Tel: +44(0) 1457 851000 Email: sales@datavideo.co.uk All the trademarks are the properties of their respective owners. Datavideo Technologies Co., Ltd. All rights reserved 2004.
