Ethernet Control Box for SE-800 RMC-120 Error! USER MANUAL Http://www.datavideo-tek.
Warnings and Precautions 1. Read all of these warnings and save them for later reference. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this unit in or near water. Service and Support It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setting up and operating your system.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill liquid of any kind onto or into this unit. 12. Except as specifically explained elsewhere in this manual, do Specifications not attempt to service this product yourself.
Table of Contents Warnings and Precautions …... …... …... …... …... …... …... …..1 Warnings and Precautions What's in the Box……………..……….……………………...……….4 Introduction……………………………………...……………..………5 Introduction Product overview A: For the ROM B, please make sure all the video effects and transition effects have turned off. Then, press up key and check the check the digital number which shows on “EFFECT” and “SPEED” if it’s showing 2.4 as below. EFFECT SPEED Features…………………………………………………..….………...
FAQ What’s in the box? 1. Q: When I select BACKGROUND, the “ON” button starts blinking. Sometimes it will speed up, but sometimes it will slow down. Is it normal? 1. RMC-120 2. AC / DC Power Adaptor * 1 3. RJ45 Ethernet cable 1M * 1 4. RS-232 cable 1.2M * 1 A: Yes, it’s normal, and it will not affect the performance. 2. Q: When I use GPI control, occasionally the “PLAY” key will turn on in SE-800 switcher. Why the remote interface doesn’t turn on? A: It’s normal. Don’t need to worry.
Trouble shooting Introduction Thank you for purchasing Datavideo’s RMC-120. The RMC- 1. “Connect failed” error message. 120 is an SE-800 accessory, which can be used to remotely control the SE-800 via RS-232 commands with a simple, but unique operator control interface. You will be amazed and pleased at what you can do with this advanced piece of technology. In order to bring out the maximum performance of this unit, we recommend that you spend some time reading this manual carefully.
Step 3: Select “Client Mode” and set up Remote IP 192.168.0.
Set up SE-800 IP address User Interface Functions 1 2 3 4 5 6 Step 1: Click on the SE800 icon 7 8 9 10 23 22 11 21 1. 20 19 18 17 16 15 14 13 Step 2: Right Click on the mouse button and select “Options” 12 Joy stick and mode selector 13. T-Bar 14. Main video source selectors 2. Voice sync adjustment 3. Video input format selector 15. Sub video source selectors 4. Audio channel selectors 16. Chroma key control 5. Audio follow video switch 17. Preset Banks F1 to F30 18.
Step 4: Setting the Local IP: 192.168.0.7 Setting the Subnet Mask : 255.255.255.0 Setting the Remote IP: 192.168.0.1 Setting the Baud Rate: 57600 Setting the Data Bit: 8 Setting the Stop Bit: 1 Setting the Parity: Odd Select TCP Misc Mode and Click on the Write Button, and then Exit Button 1. Joystick and Joystick mode selector: The Joystick control can function either in RGB Color Correction mode or Position Control mode, depending on the position of the selector below it.
selected on the Main Source bus is automatically selected. If A+V is not engaged, the input source is user selectable. Level controls for each input source are the rotary pots Set up RMC-120 IP address Step 1: Double click or Config Icon below the selection buttons. 5. A+V: Audio follow video switch.
Step 5: Set up IP address and Subnet mask. IP address: 192.168.0.1 Subnet mask: 255.255.255.0 7. Border: controls the border style and color for the Picture in Picture effect. This control is accessible when the Picture in Picture controls, Wipe and Zoom effects. (22.) are engaged. 8. Background: when Background is selected in either the Main or Sub Video Source (14, 15.), and the ON button is pressed (and the LED is lit), repeated presses of the color button cycle through the 8 possible solid backgrounds.
may cause SE-800 crash. When it happened, you could disconnect 9pin Step 3: Click on “Properties” RS-232 cable from SE-800 to resolve this problem. 14. Main Video Source Selector: used to select which of the four video input channels or background is sent to the Main video output. 15. Sub Video Source Selector: used to select which of the four video input channels or background will be transitioned to or used as a sub source in an effect. 16.
Set up PC Computer IP address Step 1: Click “Start” button. Go to “Setting”, then click on “Control Panel” 18. Picture in Picture: puts the selected Sub Video Source in a window on the Main Video Source, with control over window size and placement. Used in conjunction with the Border keys (7.) 19. Paint: when engaged (and the Paint LED is lit), this applies a posterized effect to the selected Main Video Source.
22. Transition selectors: These five selection buttons determine the transition type and allow for the Installation, Connections, Set up Connections selection of certain effects that are performed on the selected Main Video Input channel. The RS-232 Take-button executes an auto play. SE-800 Real Panel 23. Audio Bus selectors: the LEDs indicate which of the audio inputs are active in the Main audio output mix. Press the button to either include or exclude the channel.