a) Million Dollar Baby M0391 & M0591 ASSEMBLY AND OPERATION MANUAL Unforgivably Hiram This crib will provide many years of service if you adhere to the following guidelines for assembly, maintenance and operation. This crib is for residential use only. Any institutional use Is strictly prohibited, Ask your dealer or visit aur website for replacement of missing parts If needed. Please be sure ta follow the instructions for proper assembly.
Headboard & 7 WE piecemeal Use 2 screws P to soften lop bracket wolf B fo the let side areas of headboard L as shown to the left. Headboard + hos the erg-driied hales to the lef side ot it, Attach left bottom bracket wil © fo the bosom left side earn of headboard L. Use 1 screw Q for the fop-most hole and use 3 screws P for the bottom Frye holes. Make sure you line up the bottom hole of bracket C with the bottom-most per-drifed hole on the headboard.
A #tote top rail shews E 1o the tap felt edge of the drop side by fastening | with two wood screws @ Intel pre. (9 drilled holes. Attach bottom rail shoe G fo the eft cotton left edge of ihe drop side by fastening it with wood screw G and wood screw P.
Please refer to the label (figure below) on the inside face of the headboard. Record the modeling number and serial number of your til, name of store where you made the purchase, date of purchase and wood finish in the box to the right. “CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 271/4 INCHES BY 9175/8 HINGES WITH A THICKNESS NOT EXCEEDING 6 INCHES.” WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL WARRANTY AND REPLACEMENT PART REQUESTS.