User Manual

12
iLM8 – Live User Manual
Installation
Immediately upon receiving your iLM8 - Live, please make a careful inspection for any shipping
damage. If damage is found or suspected, please notify the carrier at once and then contact your
dealer. iLM8 - Live is shipped in one carton, which contains: the iLM8 - Live unit, an AC power cable,
and this Users Manual.
We strongly encourage you to save the shipping carton and shipping materials supplied with your iLM8
- Live. They are specially designed to properly protect your iLM8 - Live, and in the event that you need
to return it for service, only these OEM shipping materials can ensure its safe return to our factory.
We provide a limited 3-year warranty on all of our products; however, if you don’t register your unit, it is
impossible for us to contact you to notify you when important software upgrades become available.
Please take a few minutes to complete the warranty registration form on our website,
www.daysequerra.com.
Rack Mount Installation
The iLM8 - Live chassis has four rack mounting holes and has been designed to fit in a standard 1RU
space. Plastic ‘finishing’ washers are recommended to protect the painted surface around the mounting
holes. Locate the air vents on each side of the unit, and be sure to keep them clear so the unit may
have adequate ventilation.
Power Connection
The AC power cable supplied with iLM8 - Live must be connected from the IEC320 power entry module
to an AC mains outlet with a functional earth ground connection. For protection against electric shock
and electro-magnetic interference, do not plug the power cable into a ground lifting adapter or remove
the cable’s grounding pin. If in doubt, please consult a qualified electrician.
Please connect iLM8 - Live to an uninterruptible power supply (UPS) to protect against power
surges and low-voltage conditions. iLM8 - Live may be combined with other devices on the output of
the UPS as long as the total load is within the UPS’ capacity. Consult your UPS manual for details.
iLM8 - Live will automatically power up when AC power is applied. If AC line power is lost or
momentarily interrupted, iLM8 - Live will revert to its previous state.