User Manual

28
iLM8 – Live User Manual
Algorithm Meters Menu
The Algorithm Meters Menu contains all the real-time loudness readings that iLM8 - Live generates for
the
audio input. Each measurement is carried out to one decimal place for precision.
• 5.0!Max!SL!Average!
• 5.0!Max!ML!Average!
• 5.0!Inf.!Aver ag e!
• 5.0!True!Peak!
• 5.0!Max!True!Peak!
• 5.0!LRA!
• L!Max!SL!Average!
• R!Max!SL!Average!
• C!Max!SL!Average!
• LFE!Max!SL!Average!
!
• Ls!Max!SL!Average!
• Rs!Max!SL!Average!
• ST!Max!SL!Average!
• ST!Max!ML!Average!
• ST!Inf.!Ave ra g e!
• ST!True!Peak!
• ST!Max!True!Peak!
• ST!LRA!
• ST;L!Max!SL!Average!
• ST;R!Max!SL!Average!
Mix Monitor Settings
Input Target – Sets the Input Target to either 5.0 Surround or 2.0 Stereo ST for monitoring
Loudness Target – Sets the Loudness Target that is being monitored to either Max ML (Momentary
Loudness) 100 Msec or Max SL (Short Loudness) 1 – 60 seconds.
Over Target: Defines how many LU the Max SL or Max ML Average combined for either Surround 5.0
or Stereo 2.0 is permitted to be over the Target before OVER TARGET is illuminated in red on the Mix
Monitor panel. Range is 1 to 4 LU. Default for A/85 ATSC is 2 LU; For R128 EBU and ARIB TR-B32 is
1 LU
On Target: When the inbound audio signal is within the set range +/- LU, ON TARGET is illuminated
in green on the Mix Monitor panel.
Under Target: Defines how many LU the Max SL or Max ML Average combined for either Surround
5.0 or Stereo 2.0 is permitted to be under the Target before UNDER TARGET is illuminated in green on
the Mix Monitor panel. Range is 1 to 4 LU. Default for A/85 ATSC is 2 LU; For R128 EBU and ARIB
TR-B32 is 1 LU
Keylock Settings
Enter the Keylock Settings sub-menu to ENABLE KEYLOCK immediately or configure the keylock
timeout setting. After the user specified period of inactivity, the keylock will automatically enable. (1 to
30 minutes and off, Default: OFF) To disable the keylock, press ENTER followed by the BACK key.