User Manual

iLM8 – Live User Manual

Technical Specifications

Latency of the Eclipse Algorithm:

<4ms at 48k sampling rate

Power Consumption:

25W Maximum

Dimensions:

Rack Mount; 1 RU (1.75” x 19” x 10.75”)

Sample Rate:

32kHz – 96kHz, 24-bit

Loudness Algorithms:

ITU-R BS.1770/3 Eclipse Loudness Measure

Headphone Monitor:

3.5mm TRS connector, >150mW max into 32Ω load

Dynamic Range:

140dB, DR any input to any output

GPIO:

Environmental:

DB-9 Female, 0-5V TTL

Operating Temperature: +41 to +105° F (+5 to +40° C)

Storage Temperature: -13 to +140° F (-25 to +60° C)!

Relative Humidity: Maximum 85%, non-condensing!

Regulatory:

North America: Designed to Comply with FCC Class A

part 15 requirements.

Europe: Designed to comply with LV Directive

73/23/EEC and EMC Directive 89/336/EEC; CE Mark

(EN 55022 Class A, EN55024); Designed for RoHS

and WEEE compliance.

FCC Part 15 Regulatory Statement

This equipment has been tested and found to comply with the limits for Class A digital device pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction's manual, may cause interference to radio communications. Operation of this

equipment in a residential area is likely to cause interference in which case the user will be required to

correct the interference at their own expense. The user is cautioned that changes and modifications

made to the equipment without approval of the manufacturer could void the user's authority to operate

this equipment. The user should use only shielded and/or grounded cables to combat sources of

interference.