Instruction Manual

M2 User Manual

HD Radio

FM - Multicast HD-2 channel selected

F M 1 0 8 . 3 H D - 2

S P O R T S

Performance Loss Monitor

Performance Loss Monitor (PLM) Connections – The PLM (standard on the M2.2R) provides six

dry, floating relays with outputs on a rear panel mounted DB15 connector to report selected alarm

conditions, including loss of RF carrier, program audio, OFDM lock and PAD data. The following lists

the DB15 pin-outs. Relay contacts are rated at 1A @ 24VDC.

Note – RBDS Loss alarm available on M2.2R model only.

Alarm on Loss of

NC Contact NO Contact Common

RF Carrier 3 2 1

Audio 5 4 1

OFDM Lock 8 7 6

RBDS

– M2.2R and M4.2R only 10 9 6

PAD Data 13 12 11

MC-Avail or Delay 15 14 11

Alarm Configuration Menu – Pressing the SELECT and PRESETS switches for 5 seconds activates

the Alarm Configuration Menu. VFD displays ALARM CONFIG with “ENABLE” and “SETUP” options.

Select desired option using UP and DN switches to toggle the setting. Select “ENABLE” to arm all

alarms as previously configured and exit Alarm Configuration Menu; select “SETUP” to continue with

alarm configuration menu. Press “SELECT” to increment the menu to the next alarm function. Exit the

Alarm Configuration Menu at any time by pressing PRESETS switch.

A L A R M C O N F I G

E N A B L E > S E T U P <

All Alarms

• Select “ON” to activate all alarms at the minimum threshold with the minimum alarm

delay. Select “OFF” to set all alarms to off; select “SETUP” option to continue with

alarm configuration menu. Use UP and DN switches to toggle the setting.