User manual

M3#User#Manual#
15"
The first press of the FORCING switch when tuned to an HD-1 displays the A-D SPLIT Forcing menu.
Exit the FORCING mode or FORCING menu at any time by pressing FORCING switch.
F
O
R
C
I
N
G
M
E
N
U
<
A
D
S
P
L
I
T
>
Use the UP or DOWN switches to change the selection and press SELECT to set the Forcing mode. If
SELECT is pressed when AD SPLIT is selected, the A-D Split mode is enabled and the display
changes to the following:
Sample A-D Split VFD Display
F
M
1
0
8
.
3
H
D
-
1
A
D
S
P
L
I
T
W
A
T
T
-
F
M
• To exit AD SPLIT press FORCING menu. Press FORCING menu again to reenter menu. To
change the selections use the UP or DN scrolls.
• If SELECT is pressed when ANALOG is selected, the Forced Analog mode is entered and the
display changes to the following:
Sample Forced Analog Display
F
M
1
0
8
.
3
S
T
A
N
A
L
O
G
W
A
T
T
-
F
M
• To exit AD SPLIT press FORCING menu to return to menu.
• Use the UP and DN scrolls to change the selection.
Sample Forced Digital Display
F
M
1
0
8
.
3
H
D
-
1
D
I
G
I
T
A
L
W
A
T
T
-
F
M
• In A-D SPLIT mode, the analog audio outputs have an analog audio signal in the left channel
and a digital audio signal in the right channel.
Subsequent momentary push of FORCING switch turns FORCING mode and FORCING LED off.
Default mode is off.