User Guide 30" All Grill, LP Gas

10
LIGHTING INSTRUCTIONS
Push in and hold the selected dial for 2
seconds before turning to SEAR. Hold for 5
seconds to light the selected burner.
If burner does not light in 5 seconds,
turn dial back to
OFF and wait 5 minutes
before trying again. This will allow any
accumulated gas to dissipate.
2
3
1
Remove the cover and any cooking utensils.
Ensure the drip pan is in place.
If you are using propane gas, a slight pop or flash may occur at the burner ports a few
seconds after the burner has been turned OFF. This is normal for propane gas.