user manual

dCS Verona User Manual Manual for Software Issue 1.0x
dCS Ltd September 2004
Manual filename: Verona Manual v1.0x.doc Page 10 email: [e-mail]
English version web-site: www.dcsltd.co.uk
TYPICAL APPLICATIONS
Using a Verona with an upsampling transport
This is the simplest disc-only system using the Verona. The La Scala outputs
DSD data whether you play SACDs or ordinary CDs.
PUSH PUS H
L R OUTPUT
LEVEL
HIGH
LOW
L
R
AES 1 AES 2 RCA1 ST
TOSLI NKRCA2
CH1
DSD / SDIF
REC OUT
SUC
POWER
1394
CH2
IN - WORDCLOCK - OUT
BNC
A
B
WORDCLOCK
CH1RCA TOSLINK
AES
BNC
1
SUC1394
SDIF
CAUTION: VISIBLE AND INVISIBLE
LASER RADIATION. WHEN OPEN,
DO NOT STARE INTO BEAM.
CLASS 1
LASER PRODUCT
CH2
IN
OUT
POWER
LINK
1
SUC1394
POWER
LINK
POWER ~
EX T. R EF. INSPDIF OUTPUTSWORD CLOCK OUTPUTS
12345 123
dCS Verona Master Clock
dCS Verdi La Scala SACD Transport
dCS Elgar Plus DAC
44.1kHz Word Clocks
DSD
(SACD+CD)
LR
RL
Balanced
Outputs
To Power Amplifier or Preamplifier
Unbalanced
Outputs
- or -
Figure 1 – Using Verona to clock a La Scala and an Elgar Plus
do this: Connect up as shown in Figure 1.
do this: The first time you use this arrangement, open the menu and run the Factory
routine on all three units. This sets the Verona to 44.1kHz.
do this: If necessary, use the Input button on the Elgar Plus to select the 1394 input.
Open the Elgar’s menu and set the MS page to MS:Sync.
It is as simple as that.