Planning Guide

Data sheet
Tower Drawer Double
Model no:
TDD1-20
(refer page 2 for metric measurements)
Product Dimensions
in
a Overall height of product
21 7/8"
B Overall width of product
20 5/16"
c Overall depth of product (excluding handles)
25"
d Depth of front frame
2"
e Width of front frame
1 1/8"
f Height of chassis
2O 1/2"
g Width of chassis
18 1/2"
h Depth of chassis
2"
i Height of bottom flange
29/2"
j Height of top flange
1/2"
k Width of side flanges
15/16"
l Width of handle
8"
m Height of handle
1 /16"
n Depth of handle
1 /16"
o Height of from bottom of product to top of bottom drawer
1 /8"
p Width of drawer fronts
17 1/16"
Cutout Dimensions
in
Overall width of cutout
18 7/8"
Overall height of cutout
20 11/16"
Clearance Dimensions
in
Minimum height from ground to bottom of cutout
1 /16"
IMPORTANT NOTE: This datasheet shows only the proud installation option.
For full installation and clearance details please refer to our installation
manual.
INDICATES CABINETRY / PRODUCT DATUM --------------------------
INDICATES CUTOUT -------------------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
DATE: 28.08.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2
''). Please read the installation manual for detailed information on
installing the product. www.dcsappliances.com
0 5 10 20
inches
25"
A
FRONT VIEW
PROFILE VIEW
C
j
d
d
G
F
p
k
k
20 5/16"
B
h
h
o
21 7/8"
PLAN VIEW
i
n
m
e
DATUM: FRONT OF CABINETRY
FOR PROUD INSTALLATION
DATUM: FRONT OF CABINETRY
FOR PROUD INSTALLATION
l
DATUM: BOTTOM OF PRODUCT
CLEARANCE: GROUND LEVEL CLEARANCE: GROUND LEVEL