User Guide

16
BURNER ADJUSTMENT
Flames should be blue and stable with no yellow tips, excessive noise or lifting (Note: LP
units may have some yellow tipping). If any of these conditions exist, check the air shutter
and burner ports are clear. If cleaning these does not improve performance, the air shutter
can be adjusted as per the instructions below.
1
3
2
Reinstall the U-burner and light
to check. If the flame is blue and
stable, remove the burner, tighten
the air shutter screw and replace
all parts. If flame is still unstable,
repeat the above steps.
Ensure the griddle is
OFF and cool.
To access the air shutters, remove
the griddle plate. Refer to page 12
for guidance.
With a screw driver, loosen the
lock screw on the face of the air
shutter so it can be adjusted. If the
flame is yellow turn the air shutter
counter-clockwise, if the flame is
noisy and tends to lift turn the air
shutter clockwise.
yellow tips
noisy/lifting
blue + stable
AIR SHUTTER