Planning Guide

Data sheet
0" Liberty Grill All Grill
Model no:
BFGC30G (refer page 2 for metric measurement)
Dimensions
in
a Height below countertop datum to bottom of chassis
9 15/16''
B Overall height of grill
10 1/2''
c Overall width of grill
30''
d Overall depth of grill (excluding knobs)
26 5/8''
e Height of grill surface above countertop
9/16''
f Depth of control panel to front datum
2 1/16''
g Depth from control panel to rear of product
25 1/2''
h Depth from front datum to rear of chassis below countertop
22 1/2''
i Distance from front datum to gas inlet
20 5/16''
j Depth of rear flange
15/16''
k Depth from chassis bullnose to front datum
3 3/8''
l Width of side flanges
1 1/16''
m Width of chassis inside enclosure
27 13/16''
n Height of lid
1 3/4''
o Width of lid
29''
p Depth of lid
23''
Minimum Clearances
in
Overall width of cavity
28 1/2''
Overall depth of cavity
22 3/4''
Overall height of cavity
10 1/8''
Clearance from grill chassis to combustible construction
12''
Clearance below countertop to combustible construction
12''
Clearance to vertical non-combustible surface above countertop
at rear
3''
Clearance to vertical non-combustible surface above countertop
at sides
6''
INDICATES CUTOUT -------------------------------------------------------
INDICATES PRODUCT / CABINETRY DATUM -------------------------
INDICATES CLEARANCES ------------------------------------------------
DATE: 09.11.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(3/32
''). Please read the installation manual for detailed information on
installing the product. www.dcsappliances.com
0 5 10 20
inches
30''
c
m
26 5/8''
9 15/16''
i
A
FRONT VIEW
PLAN VIEW
PROFILE VIEW
f
k
h j
e
DATUM :
TOP OF COUNTERTOP
DATUM : FRONT OF ENCLOSURE
ll
g
d
CLEARANCE : COMBUSTIBLE CONSTRUCTION
DATUM : FRONT OF ENCLOSURE
CLEARANCE :
COMBUSTIBLE CONSTRUCTION
b
o
n
p
NOT TO SCALE
CLEARANCE :
NON-COMBUSTIBLE CONSTRUCTION
CLEARANCE :
COMBUSTIBLE CONSTRUCTION
CLEARANCE : NON-COMBUSTIBLE CONSTRUCTION