Operation Manual

ENGLISH
103
Changing the lamp
Tools required:
Phillips screwdriver.
Unplug the appliance from the mains.
1. Remove the cover from the screw in the lower part of the
cooling column.
2. Remove the plastic casing by lifting upward and toward the
outside of the appliance.
3. Free the neon lamp from the fasteners and release the
electrical connection bushes at the ends.
4. Change the lamp for another of the same type (15w) and fit,
following the steps described in point 3 in reverse.
5. Fit the plastic casing and replace the screw in the lower part
of the column.
Replace the screw cover.
Plug the appliance into the mains.
Maintaining the appliance
Frigos manual 1 (160) 29/11/07 15:32 Página 103