Operation Manual

ENGLISH

SEQUENCE OF OPERATION

1. Pull out the mains plug and remove all items from

the door compartments.

2. Remove the cover to the upper door hinge.

3. Release the screws on the upper door hinge

4. Using the flat screwdriver, lift the hinge and the

rotation capsule.

5. Disconnect the connection by pressing the tab on

the connector with a flat screwdriver.

6. Remove the door form the refrigerator by lifting it

upward.

7. Remove the control unit from the cabinet using the

flat screwdriver and levering in the slots provided

for the purpose.

8. Make a notch for the cable to pass through on the

opposite side, in the area shown on the control unit.

Use a cutting tool.

9. Re-fit the control unit by passing the cable through

the notch made.

Changing the direction of opening the doors

TOOLS REQUIRED:

• Phillips screwdriver, 1 flat screwdriver.

Frigos manual 1 (160) 29/11/07 15:31 Página 89