Operation Manual

Loading the dishwasher
There are three separate baskets, in which you can put your dinnerware, in your
machine.
The shelves on the rack are made adjustable to accommodate tall pieces.
Long cutlery, such as ladles and long knives, etc must be placed horizontally on
top of the full cutlery basket or on the racks to prevent accidental injury.
Place spoons and forks in the cutlery basket with handles down and knives with
handles up to prevent accidental injury.
Folding Plate Support Rods (If applicable)
There are four separate "folding plate support rods" in the lower basket of your
dishwasher designed to allow you more space to accomodate saucepans and
large bowls in the lower basket. You can either fold each section (A, B, C, D)
individually or, all at once, to create a large empty space.
Hold the rods and gently lift 1. Then simply bring forward 2 and fold them down.
Programme Chart and Quick Reference Card
EN
Upper Basket Height Adjustment
The default position of the upper basket of your machine is adjusted at the
higher position. According to the size of the dishes you can change the position
of the upper basket. To do this, Release the latches on both the right and left
tracks by turning them sideways. Remove the basket.
Change the position of the rollers and place the basket back on the track then
shut the latches.
Programme Chart and Quick Reference Card
EN
1
A
B
C
D
2
Note for Testing Institutes
The necessary information for performance testing will be provided upon request.
The request can be done by e-mail through: [e-mail]
Please do not forget to write the model code and stock code information of the
appliance besides your contact information in the e-mail. The model code and
stock code information can be found on the rating label, which is placed on the
side of the door.