Operation Manual

6
EN
Before first usage
After having opened the packing of your dishwasher, check
the machine against any possible transportation damage.
Never install and use damaged machines. If youre machine
is damaged contact your seller or any authorized service
immediately. Always have your machine installed by
authorized service staff to ensure correct installation
Any repairs and maintenance work on this dishwasher should
be carried out by authorized service staff only. Repairs
conducted by third persons are not only dangerous, but also
might lead to the cancellation of your warranty. The authorized
service shall not be responsible for the renewal of your
electricity and installation. Ensure your electricity and water
connection are suitable for the machine before calling the
authorized service engineer for installation.
Make sure the electricity and water connections of your
dishwasher are in compliance with the instructions for
assembly as stated in the relevant part of this manual
Any water remaining in the dishwasher after production
is carefully removed due to reasons of hygiene.
Therefore, always select pre-wash or a programme
with pre-wash before first time you use this appliance.
Before the first wash, add 1 lt of water in the salt
container of your machine
If the hardness of the water you use is more than 60°dF
(French Hardness) or if you are using pit water, we
recommend that you use filters and purifiers.
Connections
Electricity
Information regarding the electrical specifications of
your machine is provided on the sticker on the right
side of the interior door.
If you have to make the connection of your machine to
the mains voltage other than stated on the sticker, have
a proper transformer connected.
If the fuse in your house is less than 16 Amperes, have
a 16 Ampere-fuse connected by a qualified electrician.
Always call the authorized service whenever you want
to change the mains cable of your machine.