Operation Manual

7
3/4
3/4
1/2
CH
DK
S
N
SF
3/4
min 10
EN
Water Connection
Connection
Water inlet hose connection
There are two different types of water inlet hoses:
-Cold water inlet hose (up to 25°C)
- Hot water inlet hose (up to 60°C)
please check which one is applicable to your model.
If you are willing to connect your machine to natural
energy resources or to the central hot water supply, first
check out whether your water inlet hose type is suitable
by checking the temperature values written on the hose.
If your hose is not suitable, apply to your authorized
service to change the hose.
The water inlet hose is directly connected to the tap.
The water pressure coming from the tap must be
minimum 0.3 and maximum 10 bars.
Please use a valve if the water pressure exceeds 10
bars. Please turn on the tap and check for leakages
after connecting the hose. For safety reasons (if your
machine does not have the watersafe feature.) Please
ensure the tap is turned off when the machine is not
used;
For models with AQUABLOCK ,
If the water connection is made properly, this system
shall protect your house against floods.
The plastic frame of AQUABLOCK water intake system
has electrical components. Never allow contact with
water. Never cut the hose.
Appliance should be connected to the water mains with
the new hose set. The hose set of the previous machine
(if there is any) should be removed
3/4
min 10