User guide

3G2SD-RDA DIP SWITCH SETTINGS
1
MDC-1000 SETTINGS
Description:
The 3G2SD-RDA is a broadcast quality 3G/HD Down-Converter with SD Pass-through.
There are three groups of two SDI outputs that can be selected to output either the
reclocked SDI input or the down-converted input. There is also a down-converted
analogue video output for either three composite video outputs, component
(YPbPr/RGB) or composite/S-Video.
Additional features for the down-converted SD outputs include anti-filter control,
aspect ratio control, 32 SD Test Pattern generator, Embedded Audio Test Tone
Generator, Safe Title and Safe Action Graticule Generators.
INPUT AND OUTPUTS
Rear:
BNC 1 = SDI INPUT BNC 2 = SDI OUTPUT 1
BNC 3 = SDI OUTPUT 2 BNC 4 = SDI OUTPUT 1
BNC 5 = SDI OUTPUT 2 BNC 6 = SDI OUTPUT 3
BNC 7 =CVBS/Y/G/CVBS BNC 8 = SDI OUTPUT 3
BNC 9 = CVBS/Pr/R/Y BNC 10 = CVBS/Pb/B/C
Front:
Front connector is SDI OUTPUT 3
DIP SWITCHES SET 1
Switch Description OFF ON
1
Dip Switch Override
Disabled Enabled
2 Rear Connector 2 & 4 Output Down-Converted SD Reclocked HD/SD
3 Rear Connector 3 & 5 Output Down-Converted SD Reclocked HD/SD
4 Rear Connector 6 & 8 Output Down-Converted SD Reclocked HD/SD
5 Front Connector Output Down-Converted SD Reclocked HD/SD
Rear
Connector 7
Rear
Connector 10
Rear
Connector 9
Switch 6 Switch 7
Composite Composite Composite OFF OFF
Y Pb Pr OFF ON
G B R ON OFF
Composite Y C ON ON
Switch Description OFF ON
8 Safe Action Graticule Enable OFF ON
9 Safe Title Graticule Enable OFF ON
10 Centre Cross Enable OFF ON
DIP SWITCHES SET 2