Assembly Instructions

DECKED. COM | #DECKEDUSA | @DECKEDUSA DF4 | v.4 | Page 11
INSTALL: DRAWER HANDLES
• One drawer handle assembly needs to be installed.
• Save yourself the headache, watch this short installation video: DECKED.com/videohandle.
• From the underside of drawer, place the springs into the cavities on either side of the handle slots,
red spring=right spring; BAG HANDLE. NOTE: Each spring arm should point inward, not outward.
• Install a clevis pin through each outside drawer hole and through spring; BAG HANDLE.
• With DECKED logo facing outward, insert the handle ends behind the spring arms. Rotate the arms of the handle toward
the clevis pins, pulling the spring arm downward. When the handle hole is lined up with the clevis pin, push the pin
through the handle hole and through the inside drawer hole. Repeat on the other side of the handle.
• Install a hair pin through the clevis pin; BAG HANDLE.
CORRECT:
SPRING ARM FITS
IN HANDLE NOTCH
WRONG:
SPRING ARM OUT
OF HANDLE NOTCH
SPRING ARMS
POINT INWARD
HANDLE OVERVIEW
CLEVIS PIN
CORRECT:
SPRING ARM IS HERE
(FULLY HORIZONTAL)
WRONG:
SPRING ARM IS HERE
(NOT FULLY HORIZONTAL)
TOP VIEW
HAIR PIN
HELPFUL TIP: MAKE SURE SPRINGS HAVE
THE LONG ARM HORIZONTAL AND SHORT LEG
VERTICAL BEFORE INSERTING HANDLE
SPRING
NOTCHES