Assembly Instructions

Page 4 | v.4 | DF4 DECKED. COM | #DECKEDUSA | @DECKEDUSA

SHIMS

• There are 3 SHIMS provided:

• Using the information in the respective circular detail views:

a) Clean the surfaces thoroughly where the shims will be located (isopropyl alcohol is recommended).

b) Remove the layer of tape on the bottom of the shim to expose the adhesive surface.

c) Place the shim and apply with pressure.

NOTE: Repeat DETAIL A on passenger side.

CABSIDE

TAILGATE

DETAIL B

Center shim between floor beads shown.

Place shim 4 3/4” from seam in floor (green).

DETAIL A

Center shim over cabside bolt (blue).

Repeat on passenger side.

4 3/4”