Assembly Instructions

DECKED. COM | #DECKEDUSA | @DECKEDUSA DF4 | v.4 | Page 5
PREP BED
(JUST LIKE YOUR MOMMA TAUGHT YOU.)
• Remove cabside factory tie-downs on both sides of truck bed (T30 Torx driver) and SAVE THE BOLTS.
• Aluminum and coated steel don’t like each other, so the Aluminum Ford F150’s require a shim between both
cabside ammo can brackets and the truck. Install cabside ammo can brackets on both sides of the truck with the
soft rubber shim placed between the bracket and the sidewall; BAG PREP DF4.
• There is a LEFT and RIGHT bracket, verify orientation.
NOTE: Use factory tie down bolts for DECKED brackets.
DECKED TIEDOWN
AMMO CAN BRACKET
FACTORY
TIEDOWN BRACKET
REMOVE FACTORY TIE DOWN BRACKET
SAVE THE BOLTS
SHIM (SHOWN IN GREEN)
DECKED BRACKET
(INSTALL WITH FACTORY BOLTS)
➡
CAB
➡
CAB
PREP DF4