Instructions / Assembly

ManualsBrandsDECOLAV ManualsBathCameron 26 in. W x 22 in. D x .75 in. H Quartz Vanity Counter Top with 8 in. Faucet Holes in White

CAMERON MODULAR SERIES

Customer Service: 561-274-2110

www.decolav.com

LET YOUR DREAMS COME ALIVE, YOUR PASSIONS

BECOME REALITY, BE THE ENVY OF YOUR NEIGHBORS

TABLE OF CONTENTS

ATTACHING UNITS

Note: Tops are to be purchased separately, the are not included with base unit. Tops Shown on items for illustration purposes only

Installation Instructions Page

o Product Con gurations 2

o Installing the Vanity 4

o Installing the Drawer Console with the Vanity and Support leg 5 & 6

o Installing the Vanity Drawer with the Vanity and the Support Leg 6 & 7

o Installing the Sink to the Vanity Top 8

o Installing the top to the Vanity 9

o Hinge Adjustment and Care and Cleaning 10

o Limited Lifetime Warranty 11

5221 Vanity with

1661 Top

5222 Vanity with

1662 Top

5223 Vanity with

1663 Top

5225 Drawer Console

with 1664 Top

5226 Vanity Drawer

with 1665 Top

5230 Suppport Leg

Summary of content (11 pages)

PAGE 1
CAMERON MODULAR SERIES 1 ATTACHING UNITS 5221 Vanity with 1661 Top 5225 Drawer Console with 1664 Top 5222 Vanity with 1662 Top 5223 Vanity with 1663 Top 5226 Vanity Drawer with 1665 Top 5230 Suppport Leg Note: Tops are to be purchased separately, the are not included with base unit.
PAGE 2
CAMERON MODULAR SERIES 2 PRODUCT CONFIGURATIONS Note: Products shown above with optional accessories: Mirrors, Sinks, Vanity Tops and Vanity Stools avalible separately Customer Service: 561-274-2110 www.decolav.
PAGE 3
RUSTIC MODULAR CAMERON MODULARSERIES SERIES THANK YOU Dear Valued Customer, DECOLAV® would like to take this opportunity to thank you for your purchase – It is our sincere hope that you are completely satisfied with your new product. We welcome and look forward to helping you create another unique look for your next bathroom project. Prior to installation, please take a moment to review all provided materials and hardware.
PAGE 4
CAMERON MODULAR SERIES Hookup Hardware Included with the Vanity Drawer and the Drawer Console Item A B C D E F Desription Connecting Bolt (Included with Drawer Console and Vanity Drawer) Flat Washer (Included with Drawer Console and Vanity Drawer) Connecting Wood Screw (Included with Drawer console and Vanity Drawer T-nut (Included with Drawer Console and Vanity Drawer) Small T nut screw (included with Drawer console and Vanity Drawer) Insert Nut, Factory installed on Support Leg A QTY 4 4 6 4 12 2 D
PAGE 5
CAMERON MODULAR SERIES 5 INSTALLING A DRAWER CONSOLE AND THE SUPPORT LEG TO THE VANITY o Unpack the Drawer Console, Vanity and Support Leg. o Remove the door and drawers from the Drawer console and the Vanity. (This will make installation a lot easier) o Look inside the Vanity, you will see 2 holes near the top of the Vanity. These holes are bored halfway through from the factory. On the side that you wish to hook the drawer console or the Vanity Drawer to, bore the holes all the way through using a .
PAGE 6
CAMERON MODULAR SERIES 6 INSTALLING A DRAWER CONSOLE AND THE SUPPORT LEG TO THE VANITY Figure D Connecting Wood Screws ( 3 per side, 6 Total) INSTALLING THE VANITY DRAWER AND THE SUPPORT LEG TO THE VANITY o Unpack the Vanity Drawer, Vanity and Support Leg. o Remove the door and drawers from the Vanity Drawer and the Vanity. (This will make installation a lot easier) o Look inside the Vanity, you will see 2 holes near the top of the Vanity. These holes are bored halfway through from the factory.
PAGE 7
CAMERON MODULAR SERIES Factory installed insert nuts 7 Small Wood Screw (12 total) Connecting Wood Screw T-Nut (4 total) Small Wood Screw (12 total) T-Nut (4 total) Flat Washer (4 total) Connecting Bolt (4 Total) Connecting Bolt (4 Total) Flat Washer (4 total) There are 2 holes on each end panel of the vaity. The holes are bored half way through the panel from the factory. Customer will bore holes all the way through.
PAGE 8
CAMERON MODULAR SERIES 8 Installing the Sink to the Vanity Top Step #2 o Place the sink on the bottom side of the top. o Apply the mounting clips and snug them slightly. o Center the sink in the cutout (it may be necessary to look at counter from top side thats why the the clips are to be used in this step) o When Sink is in the desired location, using a magic marker make an outline around the sink on to the top.
PAGE 9
CAMERON MODULAR SERIES 9 INSTALLING THE TOP TO THE VANITY Step #1 o With the vanity in the desired location Place a small bead of silicone to the areas shown in Figure G. o Carefully lower top into position. There will be approximately 1/4 inch of top overhang on either side of the top. Back of top should be aginst the wall o Apply a bead of silicone to the bottom edge of the backsplash and to the back of the backsplash. Apply backsplash to the back of the vanity top and the wall.
PAGE 10
CAMERON MODULAR SERIES 10 Adjusting the Hinges ADJUSTING THE HINGES o The rear screw will move the door closer to the end panel or away from the end panel. If the door is rubbing the end panel, use this adjustment screw. Remember to adjust both hinges on the door for the desired clearance. o To get the doors even across the top and bottom edges of the doors use the side to side adjustment screw. Remember to adjust both hinges on the door for the correct position.
PAGE 11
CAMERON MODULAR SERIES 11 LIMITED LIFETIME WARRANTY Any Deco Lav, Inc. (“DECOLAV”) product(s), sold after December 1, 2010, will be warranted to the original end consumer to be free of true defects in material and workmanship during normal residential use for as long as the consumer owns his or her home subject to the following: • • • • • Proof of purchase (original sales receipt) from the original end consumer must be made available to DECOLAV for all warranty claims.