Operating instructions

Issue 10/06 6 Commissioning

MICROMASTER 430

Operating Instructions (Compact)

6.4 Series commissioning

An existing parameter set can be transferred to a MICROMASTER 430 frequency

inverter using STARTER or DriveMonitor (refer to Section 4.1 "Establishing

communications MICROMASTER 430

⇔ STARTER").

Typical applications for series commissioning include:

1. If several drives are to be commissioned that have the same configuration and

same functions. A quick / application commissioning (first commissioning) must

be carried-out for the first drive. Its parameter values are then transferred to the

other drives.

2. When replacing MICROMASTER 430 frequency inverters.

6.5 Parameter reset of factory setting

User access level

1 Standard

Parameter filter

0 All parameters

Commissioning parameter

30 Factory setting

Factory reset

0 disabled

1 Parameter reset

The drive inverter carries-out a parameter reset (duration, approx. 10 s) and then

automatically exits the reset menu and sets:

P0970 = 0 : disabled

P0010 = 0 : ready

START

END

P0010 = 30

P0970 = 1

P0003 = 1

P0004 = 0