Operating instructions

Issue 10/06 7 Displays and messages
MICROMASTER 430
Operating Instructions (Compact)
67
7.2 Fault messages and Alarm messages
Fault Significance Alarm Significance
F0001 Overcurrent A0501 Current Limit
F0002 Overvoltage A0502 Overvoltage limit
F0003 Undervoltage A0503 Undervoltage Limit
F0004 Inverter Overtemperature A0504 Inverter Overtemperature
F0005 Inverter I
2
t A0505 Inverter I
2
t
F0011 Motor Overtemperature I
2
t A0511 Motor Overtemperature I
2
t
F0012 Inverter temp. signal lost A0522 I2C read out timeout
F0015 Motor temperature signal lost A0523 Output fault
F0020 Mains Phase Missing A0541 Motor Data Identification Active
F0021 Earth fault A0590 Encoder feedback loss warning
F0022 HW monitoring active A0600 RTOS Overrun Warning
F0023 Output fault A0700 CB warning 1
F0030 Fan has failed …
F0035 Auto restart after n A0709 CB warning 10
F0041 Motor Data Identification Failure A0710 CB communication error
F0051 Parameter EEPROM Fault A0711 CB configuration error
F0052 Power stack Fault A0910 Vdc-max controller de-activated
F0053 IO EEPROM Fault A0911 Vdc-max controller active
F0054 Wrong IO Board A0912 Vdc-min controller active
F0060 Asic Timeout A0920 ADC parameters not set properly
F0070 CB setpoint fault A0921 DAC parameters not set properly
F0071 USS (BOP-2 link) setpoint fault A0922 No load applied to inverter
F0072 USS (COM link) setpoint fault A0952 Belt Failure Detected
F0080 ADC lost input signal
F0085 External Fault
F0090 Encoder feedback loss
F0101 Stack Overflow
F0221 PID Feedback below min. value
F0222 PID Feedback above max. value
F0450
BIST Tests Failure
(Service mode only)
F0452 Belt Failure Detected