Use and Care Manual

13
DEVICE MANAGER
DEVICE MANAGER
This section allows you to add a DVR to your account.
Select the plus icon to begin adding a new device.
P2P ID: The ID number can be found on the QR code sticker located on the top right hand corner of the DVR.
Please ensure that this is entered exactly as shown on the DVR.
Media Port: Locate the media port by navigating to the Network tab of the DVRs main menu, in the
Parameters section. This should be 9000 by default.
Device Name: Select a name for the DVR. Note that this is not listed in the DVR itself, you are required to
create a name.
Device Username: Enter the DVR username. This is the username you assigned during the initial setup of your
DVR. If you did not change the DVR username, the default username is admin.
Password: Enter the DVR password. This is the password you assigned during initial setup of the DVR.
Save: Select Save to store the settings and add the DVR to your account.
Each device associated with your account is shown on the Device Manager Screen. To adjust the settings for
a device, select one of the icons listed.