Use and Care Manual

To navigate back to the Device Management page, select the back arrow next to Add Device at the top of

the page. Each device associated with your account is shown on the Device Manager Screen. To adjust the

settings for a device, select one of the icons listed.

The calendar icon allows you to adjust the record settings for that device.

Channel: Select a channel to adjust the recording settings.

Motion Detection: Select to turn Motion Detection On or Off.

Detection Sensitivity: Select to set the motion detection sensitivity. The available options are:

• Low

• Mild

• High

• Max

Event Video Length: Set the length of the video file for motion. The options are 30 seconds, 1 minute, 2

minutes, or 5 minutes.

Camera Recording: Select to turn recording On or Off for the selected camera.

Recording Schedule: Set the recording schedule for each day of the week. Note that you must set the

schedule for each day individually. Use the Schedule grid to select the time period for recording. Each box on

the Schedule represents 1 hour. Note select either constant or motion recorded, not both at the same time.

Selecting both constant and motion at the same time may cause an issue with recording and as a result the

DVR may not record at all. Select Clear to clear all boxes.

Save: Select save to store the recording settings. Ensure that you select save every time you change the

settings for each channel.

Note:

Pleaase note that for a motion recording schedule, you will need to ensure that motion is enabled in the DVR menu.