Use and Care Manual

18
Add a device
This section allows you to add a device to your account.
Follow the steps below to add a device using the QR code:
1. Tap the Menu icon in the top left hand corner and select Device.
2. Tap the Plus sign in the top right hand corner to add a new device.
3. Tap the image of the QR code beside Device ID. A scanner will open. You may be required to allow
the app access to your smart phones camera.
4. Scan the code. Once it is successfully scanned, it will take you back to the device page.
5. Enter the DVR user name and password.
6. Tap Save in the top right corner. You will be taken to the live stream of the cameras that are
connected to that DVR.
If you are unable to scan the code, follow the steps below to manually add the device.
1. Tap the space next to the image of the QR code
2. Enter the ID number located on the QR code sticker on top of the DVR.
3. Enter the DVR user name, and password.
4. Tap Save in the top right hand corner of the screen, and you will be taken to the live stream of the
cameras that are connected to that DVR.