Use and Care Manual

27
Motion Alerts
If your DVR has motion detection enabled, you can receive notifications when motion is detected by the DVR
To enable notifications, follow the steps below:
1. Tap the Menu icon in the top left hand corner and select Motion Alerts.
2. Tap the Gear icon in the top right hand corner of the screen to view the list of devices.
3. Tap the off Icon. This will enable ‘Push’ and you will begin to see notifications when motion is detected
by a camera that is connected to that device.
You will see a pop up notification on your phone. You can also access a list of the notifications from the
alarm section of the app menu. Select Clear at the bottom of the page to clear the list of notifications.