Use and Care Manual

28
Device
This section allows you to add and remove devices from your account, as well update information for any
devices added to your account.
To add a new device to your account, follow these steps:
1. Tap the Menu Icon in the top left corner and select Device.
2. Tap the plus sign icon in the top right hand corner.
3. Enter a device name.
4. Select the login type. By default, this will be set to Device ID. To add the device using a QR code, leave
this as Device ID. To add the device using an IP address, tap Device IP and select IP/Domain.
5. Tap the QR code icon to open the scanner. Note that you may have to allow the app access to your
smartphones camera in order to scan the code.
6. Enter the media port. This should be 9000 by default. To ensure that this is correct, please see the
Networking Page of the DVR menu.
7. Enter the username and password for the DVR.
8. Tap Save in the top right hand corner. The device will be saved and the app will open the live view
page for that device.
To access the device information for a device that is already connected to your account, tap the device
name.
To remove a device from your account, drag the device name to the left and you will see a garbage can
icon. Select this and the device will be removed from your account. We recommend that this be completed if
you are no longer in possession of the DVR. A DVR can only be added to one account at a time.