User Manual

2726

GO SWISSDRIVE

Subsequently, a list symbol (1) is displayed with the phone symbol in the status bar

indicating that a new call or a new SMS was registered in the phone menu. In the list

the calls and SMS are sorted by date and time whereas the latest call or the latest

SMS are indicated at the top. If the number of the incoming call or incoming SMS is

recorded in the phone book of your mobile phone, the name recorded in your mobile

phone instead of the phone number is indicated in the list.

You can delete the list of incoming calls and SMS by navigating with the +/–keys of

the handlebar remote to the “Delete list“ button and by pressing the Conrm key.

For road-safety reasons you should always stop before using your

mobile phone.

Keep in mind that only the list recorded in your Evo control unit is

deleted. The information in your mobile phone is neither changed nor

deleted by that.

The phone menu of your Evo control unit is a pure visualisation of the

data of your mobile phone. You cannot answer or make any calls with

the Evo control unit.

 11. DATA STORAGE

Your Evo control unit offers you the option to save your current tour data and your

total data via the USB interface or the Bluetooth interface on an external device.

To ensure a trouble-free function the external storage device (e.g. USB

stick) must be formatted to FAT32.

If an external device is connected with the Evo control unit via one of these two inter-

faces, you can select one of four storage variants in the menu “Data storage” (2) by

navigating with the +/–keys of the handlebar remote to the desired button and start

the saving process by pressing the Conrm key. The currently marked button is high-

lighted green. The successful storage of the data on the external device is conrmed

by the display with a pop-up (3).

 12. SERVICE MENU

In the event of an error of the GO SwissDrive system, the service menu (4) offers you

compact instructions to x this error.

There is a list with the latest errors occurred. Each error indicator consists of a letter

and a two-digit number. With the letter the component concerned by the error can be

identied.

- M: motor error

- D: display error

- B: battery error

- C: communication error

In case of a communication error the communication between the individual system

components is disturbed. Even if the components themselves still work trouble-free,

the system changes into the error mode for safety reasons. It often sufces to check

the cables and the connectors to remedy the communication problems.