User Manual

3332

GO SWISSDRIVE

In the next step enable the Bluetooth interface of your Evo control unit by navigating

in the submenu “Bluetooth” (1) to the button “Enable Bluetooth” and press the Con-

rm key subsequently.

Now, your Evo control unit tries to set up a connection with a mobile phone in the

vicinity. To allow the connection with the mobile phone, open the GO SwissDrive App

“EvoConnect“ on the mobile phone, select your Evo control unit and conrm the re-

quest regarding the set up of a Bluetooth connection.

To set up a Bluetooth connection with a mobile phone the GO

SwissDrive App must be installed on this mobile phone. You can

download the GO SwissDrive App “Evo Connect” from the Apple App

Store (iOS devices) or the Google Playstore (Android devices).

13.4. Options main menu

The Evo control unit offers you the option to congure the lower section of the main

menu (2) according to your own wishes by selecting up to two parameters from the

current tour data which will be shown on the display.

You can select between the following indications:

- the total distance covered,

- the total power consumption since the beginning of the tour,

- the mean speed,

- the maximum speed and

- the total ride time.

The currently active parameter is highlighted grey and checkmarked (3).

To enable another parameter navigate with the +/–keys of the handlebar remote to

the desired option and press the Conrm key. If you want to disable the currently

active parameter without selecting a new parameter, navigate with the +/–keys to the

active parameter and press the Conrm key. In this case no parameter is indicated at

the respective position in the main menu.

13.5. Screen selection

To adjust your display still more to your individual needs, the Evo control unit offers

you the option to disable individual menus completely (4). These screens are then no

longer displayed when you scroll through the menu structure.

In this way you can adjust the quantity of information displayed according to your

needs. The currently active menus are highlighted grey and checkmarked. In case

you want to change the state of a menu, navigate with the +/–keys of the handlebar

remote to the desired menu and press the Conrm key.

Keep in mind that the main menu and the conguration menu cannot

be disabled.

 14. POP-UPS AND WARNINGS

The Evo control unit informs you with pop-ups about certain incidents and operating

states. A pop-up opens for the duration of four seconds and then disappears automa-

tically. The meaning of the individual pop-ups is described in the following.