User Manual

3534

GO SWISSDRIVE

Bluetooth (1): The Evo control unit has an integrated Bluetooth chip and can be con-

nected via Bluetooth 4.0 with various compatible devices, such as for ex. mobile pho-

nes. When a new Bluetooth connection was set up, you are informed with a pop-up.

Whether your mobile phone supports the Bluetooth 4.0 standard can be gathered

from the operating manual of your mobile phone. Details on how to connect a mobile

phone are given in the chapter “Congurations and settings”.

Incoming calls (2): If your Evo control unit is connected via Bluetooth with a mobile

phone, calls coming in on this mobile phone are visualised with a pop-up on the Evo

display. If the number of the caller is stored in the phone book of the connected mobi-

le phone, the contact data recorded together with the number (name, rst name) are

shown in the pop-up. If the number is not stored in the phone book, only the phone

number is displayed.

Incoming SMS (2): If the Evo control unit is connected via Bluetooth with a mobile

phone, SMS coming in on this mobile phone are visualised with a pop-up on the Evo

display. If the number of the sender is stored in the phone book of the connected

mobile phone, the contact data recorded together with the number (name, rst name)

are shown in the pop-up. If the number is not stored in the phone book, only the pho-

ne number is displayed.

Battery state of charge (3): In case the battery state of charge of your GO SwissDrive

system drops below 20%, you are informed about this fact with a pop-up. A further

indication is shown in form of a pop-up, when the battery state of charge drops below

10%.

Storage of data (4): The Evo control unit offers you the option to save your current

tour data and your total data via the USB interface or the Bluetooth interface on an

external device. The successful storage of the data on the external device is conr-

med by the display of a pop-up.

In case a greater volume of data is saved, individual pop-ups visualise the beginning

and the successful end of the saving process. If an error occurs during the saving

process, another pop-up opens with the respective information.

No external device connected (5): If you try to save data via the USB interface or

the Bluetooth interface and there is no external device connected with these inter-

faces, a respective indication is shown in form of a pop-up.

Early warnings (6): To avoid a possible overload of your GO SwissDrive system the

Evo control unit can indicate early warnings. This includes in particular the warning

concerning overheating of the motor and the battery. Before the motor or the battery

overheat and correspondingly begin to reduce their performance for system protec-

tion reasons, you will be informed on the display.

Adapt your riding style and/or the assistance level according to these

warnings to avoid a temporary reduction or even a complete loss of

the drive assistance. This is achieved by either reducing the assis-

tance level or by shifting into a lower gear with lower gear ratio in

order to reduce the temporary overload of the drive components.

5 62