User Manual

3736

GO SWISSDRIVE

 15. CHARGING A MOBILE PHONE VIA USB

CONNECTION

The docking station (1) of your Evo control unit has a USB interface (2). The USB

interface can be used either for the transfer of data or for charging a mobile phone.

To charge a mobile phone connect the mobile phone via USB cable with the USB in-

terface of the docking station. The charging process starts as soon as the connection

is set up.

Keep in mind that you can only charge a mobile phone with the GO

SwissDrive system switched on. The maximum charging current is

1.0 A. The rated charging voltage is 5V.

The availability of the charging function depends on your pedelec/e-

bike. Some cable looms have fuses for protection reasons. They may

limit the available charging current signicantly.

 16. GENERAL INFORMATION ON THE HAND-

LING OF THE EVO CONTROL UNIT

Treat your Evo control unit with the adequate care. The housing is made of plastics

and inside there are sensitive electronic components. Do not puncture or deform it,

do not expose it to open ames, great heat or liquids and do not let it drop.

Do not use your Evo control unit if it is damaged. There may be the risk

of unforeseeable damage. Contact your dealer immediately.

Do not remove or mount the display if you are in a potentially explosi-

ve area (e.g. petrol lling stations).

The display of your Evo control unit is protected against dust and

spraying water according to IP65. However, remove the display from

its mount (3) and stow it safely when transporting your pedelec/e-bike

by car or on a trailer.

Do not mount the display on the docking station if the contact sur-

faces are moist or soiled. In some circumstances this can result in

malfunction or short-circuits during the ride.

Do not transport the display together with sharp-edged objects (keys,

pocket knives), to avoid scratches and damage.

Do not expose the display to high temperatures, e.g. near sources of

heat or behind car windows during periods of intense sunshine.

Make sure no moisture penetrates the mount via the USB opening.

Keep the cover closed (4) when the USB port is not used.

Always switch off your GO SwissDrive system before you remove the

display from the docking station.