Instruction manual

Page 12
1.Freezer Compartment Setting / Icematic
On-Off Button
This function allows you to set the freezer
compartment temperature. Press this button
to set the temperature of the freezer
compartment to -18, -20, -22 and -24°C
respectively.
To stop ice formation, press Icematic on-off
button for 3 seconds. Water flow from the
water tank will stop when this function is
selected. However, ice made previously can
be taken from the Icematic. To restart ice
formation, press Icematic on-off button for 3
seconds.
2. Fridge Compartment Setting Button
This function allows you to set the fridge
compartment temperature. Press this button
to set the temperature of the fridge
compartment to 8, 6, 4, 2°C respectively.
3. Error Status Indicator
If your refrigerator does not cool adequately
or if there is a sensor failure, this indicator
will be activated. When this indicator is
active, the Freezer Compartment
Temperature indicator will display "E" and
Fridge Compartment Temperature Indicator
will display numbers such as "1,2,3".
These numbers on the indicator provide
information about the error to the service
personnel.
When you place hot food into the freezer
compartment or if you leave the door open
for a long time, an exclamation mark may
illuminate for some time.
This is not a failure; this warning will
disappear when the food cools down.
4. Key Lock Indicator
Use this function if you do not want your
refrigerator temperature setting changed.
Press the Fridge compartment setting button
and Freezer compartment setting button
simultaneously for a 3 seconds to activate
this function.
5. Eco Extra Function Indicator
It indicates that the Eco-Extra function is
active.
If this function is active, your refrigerator will
automatically detect the least usage periods
and energy-efficient cooling will be
performed during those times.
The Economy indicator will be active while
energy-efficient cooling is performed.
Press the relevant button again to deactivate
this function.
6. Eco Extra/Vacation Button
Press this button briefly to activate the Eco
Extra function. Press and hold this button for
3 seconds to activate the Vacation function.
Press this button again to deactivate the
selected function.
7. Vacation Function Indicator
Indicates that the vacation function is active.
If this function is active, "- -" appears on the
indicator of the fridge compartment and no
cooling is performed in the fridge
compartment. Other compartments will be
cooled in accordance with the temperature
set for them.
Press the relevant button again to deactivate
this function.
Dual cooling system:
Your refrigerator is equipped with two
separate cooling systems to cool the fresh
food compartment and freezer compartment.
Thus, air in the fresh food compartment and
freezer compartment do not get mixed.
Thanks to these two separate cooling
systems, cooling speed is much higher than
other refrigerators. Odour's in the
compartments do not get mixed. Additional
power saving is also achieved since the
defrosting is performed individually.