User's Manual

1.
Adjust the paper guides to the print media's width.2.
Hold both sides of the print media close to the manual feeder, and push it into the printer until it
automatically engages.
3.
There is a brief pause between the time the printer engages the print media and when it feeds into the
printer.
NOTICE: Do not force the print media into the feeder. Forcing the media causes jams.
Insert envelopes with the flap side face down and with the stamp area on the top right side.
Hold transparencies by the edges and avoid touching the print side. Oils from your fingers that are
deposited on the transparency can affect print quality.
Load letterhead face-up, with the top of the sheet entering the printer first.
If you experience problems with paper feed, turn the paper around.
Using the Rear Exit
The single-sheet rear exit provides a straight-through paper path to help reduce curling and potential jams.
This is especially useful for special media, such as transparencies, envelopes, labels, card stock, or index
cards.
To use the rear exit, open the rear exit door. When the rear exit door is open, all print media comes out the
rear exit. When closed, all media is sent to the output bin on top of the printer.