User's Manual

Try the following:

Move the guides in the tray so that they are snug against the sides of the paper.

Move the manual feeder's guides so that they are snug against the sides of the paper.

Printed pages are blank.

The toner cartridge is defective or empty. Replace the toner cartridge. See Replacing the Toner

Cartridge.

Printed pages are solid black.

The toner cartridge is defective, or your printer requires servicing.

Try the following:

Replace the toner cartridge. See Replacing the Toner Cartridge.

Call for service.

Paper curls badly once it prints and exits to the bin.

The Paper Texture setting is wrong for the type of paper or specialty media you are using.

Change Paper Texture

from Rough to Normal or Smooth.

Call a service technician to replace the fuser.

This setting can be changed using the Local Printer Settings Utility. See Dell Local Printer

Settings Utility for more information.

Calling For Service

Before calling for service, check the following:

Is the power cord plugged into the printer?

Is the power cord plugged directly into a properly grounded electrical outlet?

Is your printer properly connected to your computer?

Are all other devices attached to your printer plugged in and turned on?

Is the electrical outlet turned off by any switches?

Did a fuse blow?

Has a power outage occurred in your area?

Is a toner cartridge installed in your printer?

Is the printer cover closed completely?

If all else fails, try turning your printer off and back on again. If your printer is still not operating properly,

call for service. If you are able to print, press and release Continue to print a menu settings page,