User manual

Dell™ Printer Configuration Web Tool 107
Va l ue s :
Security
This tab contains the Set Password, Authentication System, Kerberos Server, LDAP Server, LDAP Authentication,
LDAP User Mapping, SSL/TLS, IPsec, Display Network Settings, and IP Filter (IPv4) pages.
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool.
This page can also be displayed by clicking Set Password in the left frame.
NOTE: If you forgot your password, initialize NVM (non-volatile memory) to restore the password to the default (NULL). See
"Reset Print Server" on page 106.
NOTE: When you change the password to lock the operator panel, set the password from Panel Lock in the Printer Settings
menu.
Va l ue s :
Authentication System
Purpose:
To specify the server authentication type, the server response time-out, or the search time-out.
Va l ue s :
Kerberos Server
Purpose:
To specify the settings for the Kerberos server.
Va l ue s :
Initialize NIC NVRAM
Memory and restart printer.
Click Start to initialize NVM. Network settings will revert to the factory default settings and
reboot the network capability.
Restart Printer Click Start to reboot the printer.
Administrator Password Sets the password using up to 10 alphanumeric characters. The password will appear as asterisks
(*) in the field when it is entered.
Re-enter Administrator
Password
Enter the password again to confirm.
Authentication Type (for
ColorTrack PRO)
Authentication System
Settings
Select the authentication system from the list. When the server
you are accessing uses the Kerberos authentication, select Kerberos
(Windows) as the authentication method and specify the server
settings in "Kerberos Server" on page 107.
Optional Information Server Response Time-Out Sets the amount of time the printer should wait for response from
the server. Sets the time period from 1 to 75 seconds.
Search Time-Out Sets the amount of time the printer should wait for searching the
server. Sets the time period from 5 to 120 seconds.
Kerberos Server (for Server
Address/Phone Book)
IP Address / Host Name &
Port
Sets the IP address or host name, and the port address. The port
address must be 88 or between 5000 and 65535.
Domain Name Enter the domain name.