User manual

Copying 195
Lighter/Darker
To adjust the contrast to make the copy lighter or darker than the original:
1
Load the document(s) face up into the ADF with the top edge of the document(s) in first.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 191 or "Making Copies From
the Document Glass" on page 189.
2 Press the (Copy) button.
3 Press the button until Preferences is highlighted, and then press the (Set) button.
4 Press the button until Lighter/Darker is highlighted, and then press the (Set) button.
5 Press the or button to select the desired settings, and then press the (Set) button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
Sharpness
To adjust the sharpness to make the copy sharper or softer than the original:
1
Load the document(s) face up into the ADF with the top edge of the document(s) in first.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Making Copies From the ADF" on page 191 or "Making Copies From
the Document Glass" on page 189.
2 Press the (Copy) button.
3 Press the button until Preferences is highlighted, and then press the (Set) button.
4 Press the button until Sharpness is highlighted, and then press the (Set) button.
5 Press the button to select the desired settings, and then press the (Set) button.
NOTE: Values marked by an asterisk (
*
) are the factory default menu settings.
Lighter2 Makes the copy lighter than the original. Works well with dark print.
Lighter1
Normal* Works well with standard typed or printed documents.
Darker1 Makes the copy darker than the original. Works well with light print or faint pencil markings.
Darker2
Sharpest Makes the copy sharper than the original.
Sharper
Normal* Does not make the copy sharper or softer than the original.
Softer Makes the copy softer than the original.
Softest